- 1 x Connection piece (for G1 1/2-thread)
- 1 x Connection piece (for 1", 1 1/4" or 1 1/2 hose connection) including non-return valve
|
|
The powerful clear water submersible pump from Kärcher pumping up to 14000 liters from clear to slightly polluted water per hour and is therefore perfect for pools, drainage wells and water damage in the house and in the basement. In case of more soiled water dirt the use of the enclosed stainless steel pre-filter is recommended to protect the pumps impeller. The robust stainless steel housing and the mechanical seal make the pump particularly durable. Optionally, the warranty to 5 years extension. The flat picking submersible pump is equipped with a continuously variable level sensor which starts the pump in contact with water immediately. In addition, the SP has 6 Flat Inox foldable feet, so that the submersible pump already starts at a water level of 7 millimeters. The switch makes the pump in manual mode can be set to continuous operation. Both in continuous operation as well as in the automatic mode to pump up to 1 mm residual water level wipe dry off, depending on how the level sensor is set. In addition, the Quick Connect connector socket enables a very quick and easy hookup of 1 "- 1 1/4" - 1 and 1/2 "-hoses.
|
 |
|
5 Years warranty
By registrating on www.kaercher.com/guarantee the warranty can be extended to 5 years (country dependent). |
| |
 |
|
Ceramic face seal
Protected by an oil chamber, the lifespan of the pump is increased significantly. |
| |
 |
|
Level Sensor
With the Level Sensor, the on and off switchting level can be adjusted stageless. The sensor reacts immediately and switches the pump on, as soon as the water reaches the sensor - also at lowest water level. When the water level falls below the the level sensor, the passes an after-running time of 15 seconds and then turns off. |
| |
 |
|
Stainless steel pre-filter
The included pre-filter protects the pump reliably against dirt and large particles, thus preventing clogging of the pump impeller. For flat pick-up, the filter can be removed easily. |
| |
 |
|
Flat pick-up
For mob-dry results, the pump can pump the water down to 1 mm. Therefore the pump's feet can be fold, to switch from normal operation with higher flow rate to flat pick-up. |
| |
 |
|
Auto/manual switch
Easy switching from automatic mode (Level Sensor switches pump on and off, depending on the water level), to manual mode for permanent pumping (independent of the water level).
|
| |
 |
|
Quick Connect
The outlet connection piece allows an easy and quick connection of hoses to the pump. |
| |
 |
|
Long power cable
Due to 10 m long electric cable, the pump can be connected electrically without effort. |
| |
 |
|
Comfortable Handle (rope mounting)
The handle of the submersible pump can be grapped comfortably. Further it provides the possibility to mount a rope at the pump (for letting the pump down into the water, not included). |
| |
 |
|
Automatic vent
Starting at a water level of only 7 mm the pump starts working (in manual mode) - without the hassle of venting the pump manually. |
|
 |
For pumping out of the house after a washing machine leakage (or similiar.) or after entry of groundwater in the basement. Or similiar applications.
|
 |
For pumping out the swimming pool. Or similiar applications.
|
 |
For pumping out a drainage pit. Or similiar applications.
|
|
