Kärcher Submersible dirty water pump SP 1 Dirt

With a maximum pumping capacity of 5500 liters per hour, the SP is 1 Dirt the perfect entry model for rapid absorption or pumping of rain barrels and garden ponds. It pumps reliably clean and dirty water with up to 20 millimeters large dirt particles. In case of heavy soilings in the water, an optional pre-filter can be attached addtionally, which protects the pump impeller against blockage, e.g. by branches. The ceramic face seal, well-known from the professional sector, and built in allsubmersible pumps also assures an extra long life of the pump. Optional warranty may even be extended to 5 years.
The dirty water submersible pump is equipped with a float switch that turns the unit on and off depending on the water level and thus also prevents running dry. And thanks to the attachment option for the float switch, the pump can also be operated at low water to a residual water height of 25 millimeters. Also handy: The Quick Connect connector socket enables a very quick and easy hookup of 1 1/4 "-hoses.

---

Technical Data

Flow rate, max. (l/h)	5500
Flow height, max. (m)	4.5
Pressure, max. (bar)	0.45
Grain size of dirt particles that ca be transported max. (mm)	20
Motor rating, max. (W)	250
Delivery temperature, max. (° C)	35
Connection thread	G1
Power cable (m)	10
Switch on height min./max. (cm)	43/50
Switch off height min./max. (cm)	18/30
Minimum fluid height (manual mode) (mm	60
Residual fluid height (mm)	25
Frequency (Hz)	230-240
Voltage (V)	50
Weight without accessories (kg)	3.7
Dimensions incl. accessories (L x B x H) (mm)	229 x 238 x 303

---

Standard accessories

• 1 x Connection piece (with 1''thread for 1 1/4" hoses)

---

 

Features & Benefits

		5 Years warranty By registrating on www.kaercher.com/guarantee the warranty can be extended to 5 years (country dependent).
		Ceramic face seal Protected by an oil chamber, the lifespan of the pump is increased significantly.
		Additional pre-filter For optimal protection of the pump, an optional (separately available) filter can be added and mounted easily by hand.
		Float switch fixation To turn the pump to manual, permanent pumping, independent of the water level, the float switch can be fixed at the backside of the pump.
		Quick Connect The outlet connection piece allows an easy and quick connection of hoses to the pump.
		Long power cable Due to 10 m long electric cable, the pump can be connected electrically without effort.
		Comfortable Handle (rope mounting) The handle of the submersible pump can be grapped comfortably. Further it provides the possibility to mount a rope at the pump (for letting the pump down into the water, not included).
		Automatic vent Starting at a water level of only 60 mm the pump starts working (in manual mode) - without the hassle of venting the pump manually.

 

Application

For pumping out ponds or a swimming ponds. Or similiar applications.