Discover the RCF 3 mopping robot - your smart cleaning helper! With our exclusive promotion, you can save big now. Take advantage and experience first-class cleaning performance at special prices!
Clean floors at the touch of a button: from now on, the smart RCF 3 robotic mop takes care of the otherwise tedious and time-consuming wet mopping of hard floors. Thanks to the proven FC roller technology, the RCF 3 not only removes stubborn dirt or dried liquids, but also loose dust and dry crumbs. In doing so, it automatically detects carpets and skilfully avoids them. The RCF 3 has two tanks that allow it to constantly supply fresh water to the roller and to collect the dirty water separately. Light, dry dirt is easily picked up and also transported into the dirty water tank. Different cleaning modes can be set with the practical app control. The robot can thus be adapted very flexibly to a wide range of needs and requirements. For cleaning, the robot is conveniently started via app or by pressing a button on the device. If the RCF 3 needs help, in many situations it will tell you via voice output or through the app.
Features and benefits
|
FC roller technology:
- The RCF 3 robot mop works with proven Kärcher roller technology, which ensures particularly thorough wet cleaning of hard floors. Light, dry dirt, e.g. dust fluff, small crumbs or road grime, is picked up directly during wet mopping and collected in the dirty water tank together with the used mopping water. The roller technology with continuous cleaning of the roller and the 2-tank system ensure optimum results, even on larger areas, as a clean roller is always used.
|
|
2-tank system with fill level indicators:
- With clever 2-tank system: The microfibre roller is constantly moistened with fresh water from the fresh water tank. The used water and dirt are collected in the 2nd tank. The tank level indicators show whether the dirty water tank is full or the fresh water tank is empty. In both cases, the robot interrupts its work and returns to the charging station. This is indicated visually via LEDs directly on the cleaning robot and also via a notification in the app.
|
|
Carpet detection and avoidance:
- The RCF 3 automatically recognises carpeted areas with its ultrasonic sensor and marks them on the map in the app. During cleaning, the robot drives around the carpets using a clever driving strategy and prevents them from getting wet. If required, carpet avoidance can also be deactivated via the app so that the mopping robot passes over all surfaces - even low-pile carpets.
|
|
Convenient app control with WiFi:
- Numerous settings can be customised using the app.
- The app enables the cleaning robot to be controlled and configured from any location. Even when you are not at home.
- Output of information about the current device status and display of cleaning progress via app.
|
|
Precise mapping of existing soils and versatile customisation options in the app:
- Several maps, e.g. for different floors, can be saved in the app.
- Define zones that are not to be travelled over and not cleaned (e.g. carpets, play areas and larger obstacles) or that are to be approached specifically and mopped individually.
- Definition of individual cleaning settings (cleaning intensity, water quantity, number of passes) for specific rooms or areas depending on cleaning requirements or degree of soiling.
|
|
Crash sensors:
- The fall sensors reliably prevent the RCF 3 from falling, e.g. on stairs or landings.
The sensors continuously scan the floor. If a large step or similar hazard is detected, the control unit receives a signal and causes the robot to turn back.
|
|
Data protection and updates:
- As a manufacturer based in Germany, Kärcher attaches particular importance to data protection and fulfils all legal requirements applicable here with the utmost care.
- All data traffic between the Home Robots app on the smartphone and the robot mop runs via a cloud with servers located exclusively in Germany.
- Regular updates improve and expand the performance of the mopping robot and app. In addition, the security of the system is continuously adapted to current requirements.
|
Self-cleaning function of the roller |
- Dirt is continuously removed from the roller at the scraper edge during the cleaning run and is reliably collected on the hair comb or transported into the dirty water tank.
- Best cleaning results with proven roller technology and 2-tank system: Dirty water and particles are removed from the roller during the cleaning cycle. Also ideal for larger areas.
|
Voice output: |
- Always well informed: The RCF 3 reports important information or the current status via voice output.
- If the mopping robot needs help or service, it communicates this via voice output in many situations.
|
Timer function: |
- Set cleaning times and create cleaning schedules via the app.
- The RCF 3 starts cleaning journeys automatically based on the specified times.
|
|
Technical data
Battery charging time (min) |
180 |
Battery type |
Lithium-ion battery |
Battery capacity (Ah) |
5,2 |
Running time per charge (min) |
120 |
Area performance (dependent on cleaning mode) (m²) |
80 |
Fresh water tank (ml) |
430 |
Dirty water tank (ml) |
115 |
Current type, charging station (Ph/V/Hz) |
1 / 100 - 240 / 50 - 60 |
Wiping robot weight (kg) |
4,5 |
Weight, base station (kg) |
0,4 |
Weight incl. packaging (kg) |
7,2 |
Wiping robot dimensions (D x H) (mm) |
340 x 120 |
Dimensions, charging station (L x W x H) (mm) |
142 x 153 x 124 |
Equipment
- 2 x microfibre roller
- Cleaning tool
- Fresh water tank
- Dirty water tank
- Charging station
- Autonomous cleaning
- Fall sensors
- Carpet sensor
- Operation via app
- Wi-Fi
- Voice output
- Laser navigation system (LiDAR)
- Timer function: multiple timers possible
- Cleaning modes: wet cleaning, automatic, spot
Video
Application areas
- On all hard floors such as parquet, laminate, cork, stone, linoleum or PVC