Polymer dispersion for initial, interim and maintenance care of floor coverings. Forms an anti-slip, dirt-repellent and abrasion resistant protective film. High covering power.
This product replaces the product: 6.295-034.0.
Properties
slip-resistant according to DIN 51131 und DIN EN 13893 (depending on floor covering)
very short drying time
Produces a semi-matte gloss
easy to repolish
suitable for removing care film without water
highly dirt-repellent
also suitable for normal cleaning (spray cleaner, wiping) and maintenance cleaning (mopping)
excellent flow properties
smear-resistant due to high resistance to cleaning agents
much greater area coverage in maintenance cleaning
covers with just two coats
worn areas are easy to repair, e.g. walkways, footprints, chair marks
Application
Floor cleaning at:
Contract cleaning
Municipal
Hotels
Gastronomy
Catering
Retirement homes
Doctor’s surgery
Retail
Application
Coating
The surface must be free from care film residues and dirt (pH 7-8.5). The surface must be dry.
Do not dilute or mix product with other products.
Application quantity depending on absorbency and type of floor: 1st coat: about 20 - 40 ml/m², 2nd coat: about 15 - 25 ml/m². Yield depending on application quantity.
Distribute product evenly, sparingly, quickly and overlapping (wet on wet) using a flat or articulated mop.
Allow to dry completely between applications (about 20 minutes, depending on humidity and temperature).
Repeat as necessary (2 coats recommended). Apply product crosswise.
Walkable after fully dry (about 3 hours).
Suitable for normal traffic after about 24 hours.
Fully hardens after about 14 days
Spray cleaner
Surface must be free from dirt.
Dilute product depending on care film damage.
Apply care agent solution to the area to be treated with a sprayer.
Polish surface immediately with device.
Wipe restoration
Surface must be free from dirt.
Dilute product depending on care film damage.
Apply care agent solution to the area to be cleaned in sections with a flat or articulated mop. Distribute product evenly, sparingly, quickly and overlapping (wet on wet).
Allow to dry completely (about 20 minutes, depending on humidity and temperature).
Repeat process where necessary.
When completely dry, polish with a single disc machine (optional)
Wipe care
Surface must be free from dirt.
Dilute the product depending on the desired degree of cleaning.
Clean surface manually with a damp mop.
Using notes
Do not apply to water-sensitive surfaces.
Do not apply to wood or unsealed parquet flooring.
Only store in original container between 5 and 30°C.
Carry out an adhesion test on factory treated floors.
Do not put product residues back in the container.
Close the container immediately after use.
Store away from frost.
Clean the cleaning machine after use.
Warnings and safety recommendations according to EC Directives:
Contains triisobutyl phosphate. May produce an allergic reaction
