- 1 x Suction hose (4 m)
- 1 x Suction tube, metal (1 m)
- 1 x Wet / dry vacuuming floor tool (370 mm)
- 1 x Crevice tool
- 1 x Filter bag, paper
- 1 x Cartridge filter, paper
- Antistatic system
- Stainless steel container
- Bumper bar
- Push handle
- Safety class, I
- Caster with brake
|
|
The NT 80/1 B1 M (IP 54 approved) is a powerful, one-engined wet/dry vacuum cleaner with an intake cartridge air filter for the turbine and a cartridge type filter and paper filter bag as a pre-filtration (both filters are approved for dust class M). It is used for vacuuming medium hazardous dusts with MAK > 0.1 mg/m³.
This unit features a compact fan housing, equipped with a continuous antistatic system, a stainless steel container and with complete accessory.
If maxium liquid capacity is reached during wet pick-up, a double float system will stop the air flow rate to prevent overflow.
When filter or suction unit - like suction hose, tubes, floor tool - are clogged or the air flow rate is lower than 20 m/s the signal lamp light up.
On the back side of the unit a floor tool holder is integrated. Two large back wheels and two castors (electrically conductive) - one with brake - give the NT 80/1 B1 M high mobility.
|
|
This wet/dry vacuum cleaner is a particularly user-friendly unit suitable and approved for removing combustible dusts in zone 22 as well as category M hazardous dusts or normal dusts & liquids.
The paper filter bag (scope of supply 1/5) is a pre-filter and has to be used in general in a safety vacuum cleaner.
|
|
Safety first
The NT 80/1 B1 MS features automatic water level control and can only be operated with a sufficient water level.
Zone 22 + dust class M
For combustible dusts in dust explosion classes, zone 22 and health-endangering dusts, dust class M.
|
