When renovating old buildings, asbestos and other hazardous and carcinogenic substances are often released and must be removed immediately. The NT 30/1 Tact Te H ACD is the ideal wet and dry vacuum cleaner for this purpose. It is tested and approved under the new ACD standard in accordance with IEC 60335-2-69:2021 for the pickup of combustible dusts and for all class H dusts. Its compact, mobile design makes it ideal for jobs where it is needed in multiple different locations. With the cleanable Safety/HEPA flat pleated filter, hazardous dusts can be safely captured in the safety filter bag or PE disposal bag; while large quantities of less hazardous dusts can be vacuumed up straight into the container. The Tact sensor-controlled filter cleaning system ensures consistently high suction power by keeping filters clean at all times. A practical device socket with auto-start, as well as an antistatic system with conductive accessories round off the clever concept of our NT 30/1 Tact Te H ACD.tical power outlet with auto-start, as well as the fully antistatic design including conductive accessories round off the clever concept of our NT 30/1 Tact Te H.
Features and Benefits
| Filtration system with H filter and Tact filter cleaning system |
- Sucks less dangerous dust directly into the container.
- Filtration efficiency: 99.995 per cent.
- The greatest possible health protection without sacrificing suction power or filter endurance.
|
| Fulfils testing requirements for dust class H, with additional test for "Asbestos" in accordance with TRGS 519 |
- In Germany, only safety vacuum cleaners with this licence are allowed to be used to vacuum dust that contains asbestos.
|
| ACD certification |
- Approved for vacuuming combustible dusts.
- Certified according to IEC 60335-2-69:2021. Increased user safety.
|
| Tact sensor-controlled filter cleaning system |
- Sensor-controlled filter cleaning.
- Optimum, needs-based frequency of filter cleaning.
- Minimised noise emission.
|
| Complete antistatic system with conductive accessories |
- Users are effectively protected against electric shocks and electrostatic charging.
|
| Power outlet with automatic on/off switch |
- Te versions are equipped with power outlet, automatic on/off switch and antistatic preparation.
|
| Dust class H safety vacuum cleaner |
- Filtration efficiency of 99.995%.
- Electronic volume flow monitoring.
- Ensures clean and safe workplaces.
|
| Safety/HEPA flat pleated filter |
- Certified for dust class H. Dust separation degree: 99.995%.
- PES fibre material with double PTFE coating: resistant to rot and moisture.
- Ideal for vacuuming fluids, fine dust and coarse dirt.
|
| Tool adapter for power tools |
- Enables dust-free drilling, sawing or sanding using power tools.
- Comes with rubber attachment and false air rotating ring.
- Rotating ring for adjusting the suction power.
|
Technical data
| Air flow rate (l/s) |
74 |
| Vacuum (mbar/kPa) |
273 / 27,3 |
| Container capacity (l) |
30 |
| Max. rated input power (W) |
1380 |
| Standard nominal width |
35 |
| Sound pressure level (dB(A)) |
69 |
| Container material |
plastic |
| Number of current phases (Ph) |
1 |
| Frequency (Hz) |
50 - 60 |
| Voltage (V) |
220 - 240 |
| Weight (kg) |
14.4 |
| Dimensions (L × W × H) (mm) |
560 x 370 x 580 |
Equipment
- 1 x Suction hose, 4 m (conductive)
- 2 x Suction tube, stainless steel, (0.55 m)
- 1 x Wet and dry floor nozzle, 360 mm
- 1 x Crevice nozzle
- 1 x Power tool connection adaptor
- 1 x Flat pleated filter, PTFE HEPA (dust class H)
- 1 x Safety bag
- 1 x Plastic disposal bag
- Automatic switch-off at max. filling quantity
- Automatic on/off switch for power tools
- Antistatic preparation
- Eco filter system
- Sturdy bumper
- Protection class, I
- Steering roller stop
- Filter cleaning, Tact filter cleaning system
